
Concrete: Our concrete is hard! It is manufactured with our NYS approved sand and stone. We offer assistance in calculating quantities as well as suggesting various additives and strengths for your projects. We offer “flow-able fill” for those unique backfill situations. We also are approved for and capable of making HP concrete.
Concrete Specifications
- 3000 PSI @ 28 days– footers, piers, walls
- 3500 PSI @ 28 days– slabs and walls
- 4000 PSI @ 28 days– slabs
- 4500 PSI @ 28 days– higher strength slabs
- 5000 PSI @ 28 days– higher strength slabs

Granite: Being 100% Non-Carbonate our stone is highly sought after. It is commonly used as a high-friction aggregate for NSYDOT Top Surface treatment.
Granite Specifications:
- High-Friction
- Crushed or Natural
- Various Sizes: 1A's, 1's, 2's
- 100% Non- Carbonate,
- NYS DOT Approved Source Number: 7-58F,G

Limestone: Limestone is processed by drilling and blasting at our 2 quarry locations. We then crush and screen the stone into various sizes and gradations for use in a wide range of projects. Crusher run is the most commonly used limestone product. Depending on the customer's needs, this product is available from small ¼” dust for finish grading under paving stones, ¾” -1 ½” size for use in driveways and parking lots, and up to 4” for use as a sub-base in construction or “off-road” use such as for camp-roads and ATV trails.
Crusher Run Specifications:
- 4” – Sub-Base, Camp roads
- 1½” – Sub-base, Parking lots
- 1” – Sub-base, Driveways
- ¾” – Fine driveway mix
- Dust – used to top existing sub-base

Naturals: This product is internationally recognized for its aesthetic qualities in hard landscaping. Our particular naturals have a highly interesting pink hue with a touch of “Ottawa Red.” These are available both crushed and natural (with rounded edges).
Naturals Specifications:
- Decorative Landscape Stone
- Crushed or Natural
- 3’ down to 1”
- “OTTAWA RED"
- 100% Non-Carbonate
- Used in Construction of Landfill Cells
- NYS DOT Approved Source Number: 7-28R

Retaining Wall Block: Whether you are keeping something out or keeping it in, we have block products that can help. We offer large “barricade” blocks that are 2’x 2’x 6’ (2 tons) with a v-locking system. These are the blocks seen on highways along construction sites…not easily moved. They are used for building silage or manure bunkers on farms as well. We also have decorative (one textured façade) landscape blocks that are 2’ x 2’ x 4’ (1.4 tons) for building landscape walls in a residential or commercial setting where “looks matter.” We have corners and tops for providing a finished product that is rugged yet, elegant. Both styles have a lifting-eye for easy lifting and speedy placement.
Retaining Wall Block Specifications
- We have landscape concrete blocks for retaining walls (radius and curved walls)
- We also have Barrier blocks – used for bunk silos / plain retaining walls / barriers
- (Our blocks use a “V” locking system.)

Sand: Grainy, sharp, available in various blends and coarseness. Our free stall sand is used by local farmers for livestock bedding. Masonry's use our mason sand for block laying and mixing grout. The coarser filter sand is utilized for sewers and potable water filtration systems. Town, County, and State highway departments use our road sand and sand and salt mix products on the roads to keep ice under control. We also offer raised bed septic sand for managing specific percolation rates.
Sand Specifications:
- Low Acid Solubility
- Free Stall Sand – Screened – cow bedding
- Mason – Laying blocks, grout
- Filter – Sewer/ Potable water filtration systems
- Road Sand – Sand & Salt Mix
- Raised Bed Septic Sand – for specific percolation rates

Topsoil: Our topsoil comes from centuries-old farm lands, and therefore is dark, rich and virtually stone-free (even before screening).
Topsoil Specifications:
- Good for growing weeds! =)
- Caution: may actually grow grass.
Contact us for assistance with planning and estimating your own building, site work, and construction projects.